. Catalog Diffusers Lattices TRS-R


Wester_m 15.03.2024

Ventilation grille with streamlined slats

Ventilation grilles made of galvanized sheet steel with individually adjustable vertical slats for installation in round air ducts

Standard sizes 225 × 75 – 1225 × 225 mm
Air flow range 11 – 930 l/s or 40 – 3348 m³/h
Front panel made of galvanized sheet steel
Outer frame with hidden holes, width 27 mm

Additional equipment and accessories

The front panel is painted in RAL CLASSIC colors
Add. components for balancing air flow and air flow control

Ventilation grilles are air distribution devices for ventilation and air conditioning systems for supply and exhaust air. They direct supply air into the room. Ventilation grilles with adjustable slats allow you to change the direction of air flow if necessary. The result is a mixing of air flows in comfort zones and industrial areas, with good distribution of air currents throughout the room.

The ejection level decreases as the air flow decreases, i.e. The air flow speed decreases as the distance from the grille increases. The distance at which the air flow speed reaches a certain value, e.g. 0.2 m/s is called projection distance. The supply air jet from wall grilles installed close to the ceiling reaches a greater projection distance than the free air jet (from a grill installed far from the ceiling). Single grilles, grille groups and sections achieve different projection distances.

In cooling mode, it is necessary to take into account the deviation of the jet in relation to the working area, which increases with an increase in the temperature difference between the supply air and the air in the room and a decrease in the flow rate. In heating mode, the supply air stream is deflected towards the ceiling. This does not have a negative effect on the air flow rate in the work area, but may affect the overall ventilation of the room.

Standard sizes from 225 × 75 to 1225 × 225 mm

Min. air flow level 11 – 275 l/s or 40 – 990 m³/h

Max. air flow level, at LWA max. 40 dB(A) without add. components 62 – 930 l/s or 223 – 3348 m³/h

Temperature difference between supply air and room –12 to +4K

① Outer frame
② Cross slats

Consultation / Order

Leave a request for consultation

Please enable JavaScript in your browser to complete this form.
Please enable JavaScript in your browser to complete this form.