SPV SERIES
Round diffuser for supply ventilation
Regulation manually, using an actuator or thermal actuator
High level of ejection
Easy installation
Suitable for both exposed installation and suspended ceilings
The diffuser can be adjusted manually, using an actuator or a thermal actuator. For manual adjustment, the slats are locked in the desired position by a nut on the central screw, as shown in the “Commissioning” section on the last page.
SPV round swirl diffuser with adjustable slats for supply ventilation. The diffuser is designed for large volumes of air and ceiling heights of up to 16 m.
The diffuser is equipped with a square shaft for mounting the actuator, as shown in the “Commissioning” section on the last page. A grille is installed at the base of the diffuser, which ensures even more uniform air flow.
Regulation using a thermal drive occurs when exposed to supply air. If the temperature is too high, the diffuser will produce a vertical stream, if low – a horizontal stream.
Installation
The SPV is attached to the duct using screws.
